- 41 - BIOS Setup
(Note) This item is present only when you install a memory module that supports this feature.
Extreme Memory Profile (X.M.P.) &
(Note)
, System Memory Multiplier (SPD), Memory
Frequency(Mhz)
The settings under the three items above are synchronous to those under the same items on the Advanced
Frequency Settings menu.
Performance Enhance &
Allows the system to operate at three different performance levels.
Normal Lets the system operate at its basic performance level.
Turbo Lets the system operate at its good performance level. (Default)
Extreme Lets the system operate at its best performance level.
DRAM Timing Selectable &
Quick and Expert allows the Channel Interleaving, Rank Interleaving, and memory timing settings below
&
When using a non-XMP memory module or is set to Disabled, this item
will display as 1.50V. When is set to or , this item will
display the value based on the SPD data on the XMP memory.
&
The value displayed here is dependent on the CPU being used.
Memory Frequency(Mhz) &
is the memory frequency that is automatically adjusted according to the Host Clock Frequency, Processor
Base Clock, and System Memory Multiplier settings.
Advanced Memory Settings `
To Next Page
Loading...
