Unique Features - 64 -
Step 3:
When partitioning your hard drive, make sure to leave
unallocated space (10 GB or more is recommended;
actual size requirements vary, depending on the
amount of data) and begin the installation of the
operating system.
Step 4:
After the operating system is installed, click Start,
right-click the Computer and select Manage. Go to
Disk Management to check disk allocation.
Step 5:
space (black stripe along the top). Please note that if there is no
enough unallocated space, Xpress Recovery2 cannot save the
Step 1:
Select BACKUP to start backing up your hard drive
data.
Step 2:
Disk Management to check
disk allocation.
B. Accessing Xpress Recovery2
Boot from the motherboard driver disk to access Xpress Recovery2. When you see the following message: Press
any key to startup Xpress Recovery2, press any key to enter Xpress Recovery2.
C. Using the Backup Function in Xpress Recovery2
Xpress Recovery2 will automatically create a new
To Next Page
Loading...
