Appendix - 80 -
The BIOS Setup menus described in this section may differ from the exact settings for your moth-
erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you
have and the BIOS version.
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). To
create RAID, set Intel SATA Controller Mode under the Peripherals menu to RAID Mode (Figure 1) (AHCI
mode by default). If you do not want to create RAID, set this item to IDE Mode or AHCI Mode.
Step 2:
Save changes and exit BIOS Setup.
Figure 1
To Next Page
Loading...
