Gigabyte GA-X99-Gaming 5P - Peripherals

BIOS Setup
- 58 -
2-6 Peripherals
& Initial Display Output
 SpeciestherstinitiationofthemonitordisplayfromthePCIExpressgraphicscards.
PCIe1Slot SetsthegraphicscardonthePCIE_1slotastherstdisplay.(Default)
PCIe2Slot SetsthegraphicscardonthePCIE_2slotastherstdisplay.
PCIe3Slot SetsthegraphicscardonthePCIE_3slotastherstdisplay.
PCIe4Slot SetsthegraphicscardonthePCIE_4slotastherstdisplay.
& OnBoard LAN Controller
Enables or disables the Qualcomm
®
AtherosKillerE2201LANfunction.(Default:Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& Audio LED
Enables or disables the onboard audio LED function.
Off Disables this function.
StillMode  TheLEDstaysconstantlyon.(Default)
Beat Mode The brightness of the LED changes according to the music rhythm.
Pulse Mode The brightness of the LED changes slowly and smoothly like breath.
& Rear Panel LED
Enables or disables the audio LED on the rear panel I/O shield.
On   TheLEDwilllightandfollowthebehavioroftheonboardaudioLED.(Default)
Off Disables this function.