Gigabyte GA-Z77X-UD5H - Marvell SATA Controller Configuration

- 59 -
BIOS Setup
& GSATA Controller (Marvell 88SE9172 Chip, GSATA3 8/eSATA connectors)
 EnablesordisablesRAIDfortheSATAcontrollersintegratedintheMarvell88SE9172chiporcongures
the SATA controllers to AHCI mode. The area below displays the current status of the two SATA ports.
IDEMode  DisablesRAIDfortheSATAcontrollersandcongurestheSATAcontrollerstoIDE
mode.
AHCIMode CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
RAID Mode Enables RAID for the SATA controllers.
Disabled Disables this function.