Gigabyte GA-Z87-DS3H - Page 40

BIOS Setup
- 40 -
& ExtremeMemoryProle(X.M.P.)
(Note)
, System Memory Multiplier, Memory
Frequency(MHz)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& MemoryOverclockingProles
(Note)
 Allowsyoutosetthememoryfrequency.Optionsmayvarydependingonthememorybeingused.(Default:
Disabled)
& Memory Boot Mode
(Note)
Provides memory detection and training methods.
Auto   LetsBIOSautomaticallycongurethissetting.(Default)
Normal  Standarddetectionandtraining
Fast   Skipmemorydetectionandtraininginsomespeciccriteriaforfastermemoryboot.
Coldboot Detect and train memory at every single boot.
& Memory Enhancement Settings
 Providesthreedifferentmemoryperformanceenhancementsettings:Normal(basicperformance),Enhanced
Stability,andEnhancedPerformance.(Default:Normal)
& Memory Timing Mode
Manual and Advanced Manual allows the Channel Interleaving, Rank Interleaving, and memory timing
settingsbelowtobecongurable.Optionsare:Auto(default),Manual,AdvancedManual.
& ProleDDRVoltage
 Whenusinganon-XMPmemorymoduleorExtremeMemoryProle(X.M.P.) is set to Disabled, this item
will display as 1.50V.WhenExtremeMemoryProle(X.M.P.) is set to Prole1 or Prole2, this item will
displaythevaluebasedontheSPDdataontheXMPmemory.
(Note) ThisitemispresentonlywhenyouinstallaCPUandamemorymodulethatsupportthisfeature.
` Advanced Memory Settings