Gigabyte GA-Z87-DS3H - Configuring Microphone Recording

Appendix
- 92 -
(Note) Enter theDigital Output(Optical)screen tocongure further settingsif you usethe S/PDIFOut
connector(s)onthebackpanelfordigitalaudiooutputorentertheDigital Output screen if you use
theinternalS/PDIFOutconnector(SPDIF_O)fordigitalaudiooutput.
ConguringS/PDIFOut:
On the Digital Output(Optical) screen
(Note)
, click the Default Format tab and then select the sample rate and
bit depth. Click OK to complete.
B. S/PDIF Out
The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality.
6-1-3 ConguringMicrophoneRecording
Step 2:
ConnectyourmicrophonetotheMicinjack(pink)onthe
backpanelortheMicinjack(pink)onthefrontpanel.
Thencongurethejackformicrophonefunctionality.
Note:Themicrophonefunctionsonthefrontpaneland
back panel cannot be used at the same time.
Step 1:
After installing the audio driver, restart your computer.
ThenswitchtoWindowsdesktopmode.TheHD Audio
Manager icon  will appearinthenotication area.
Double-click the icon to access the HD Audio Manager.