Gigabyte GA-Z87M-D3H - Page 39

- 39 -
BIOS Setup
` Advanced Memory Settings
(Note) ThisitemispresentonlywhenyouinstallaCPUandamemorymodulethatsupportthisfeature.
& ExtremeMemoryProle(X.M.P.)
(Note)
, System Memory Multiplier, Memory Frequency(MHz)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& Memory Upgrade
(Note)
 Allowsyoutosetthememoryfrequency.Optionsmayvarydependingonthememorybeingused.(Default:
Auto)
& Performance Enhance
Allows the system to operate at three different performance levels.
Normal  Letsthesystemoperateatitsbasicperformancelevel.
Turbo   Letsthesystemoperateatitsgoodperformancelevel.(Default)
Extreme Lets the system operate at its best performance level.
& ExtremeMemoryProle(X.M.P.)
(Note)
 AllowstheBIOStoreadtheSPDdataonXMPmemorymodule(s)toenhancememoryperformancewhen
enabled.
Disabled  Disablesthisfunction.(Default)
Prole1  UsesProle1settings.
Prole2
(Note)
 UsesProle2settings.
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data.(Default:Auto)
& Memory Frequency (MHz)
 Therstmemoryfrequencyvalueisthenormaloperatingfrequencyofthememorybeingused;thesecond
is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.