Gigabyte GA-Z87X-UD3H - Page 58

BIOS Setup
- 58 -
` Serial ATA Port 0/1/2/3/4/5
& Port 0/1/2/3/4/5
 EnablesordisableseachSATAport.(Default:Enabled)
& Hot plug
 EnablesordisablethehotplugcapabilityforeachSATAport.(Default:Disabled)
` SuperIOConguration
 ThissectionprovidesinformationonthesuperI/Ochipandallowsyoutoconguretheserialport.
& Serial Port A
 Enablesordisablestheonboardserialport.(Default:Enabled)
` Intel(R) Smart Connect Technology
& ISCTConguration
Enables or disables Intel
®
SmartConnectTechnology.(Default:Disabled)
& Force to ESATA or GSATA
 AllowsyoutoselectwhethertousetheGSATA36/7oreSATAconnectors.(Default:Auto)
Auto    LetstheBIOSautomaticallycongurethissetting.IftheGSATA36/7andeSATA
connectors are connected at the same time, the BIOS will enable the GSATA3 6/7
connectorsrst.(Default)
Force to ESATA Enables the eSATA connectors.
Force to GSATA Enables the GSATA3 6 and GSATA3 7 connectors.
` Marvell
®
ATAControllerConguration