Gigabyte GA-Z97M-DS3H - Power Management Overview

` SuperIOConguration
 ThissectionprovidesinformationonthesuperI/Ochipandallowsyoutoconguretheserialportand
parallel port.
& Serial Port A
 Enablesordisablestheonboardserialport.(Default:Enabled)
& Parallel Port
 Enablesordisablestheonboardparallelport.(Default:Enabled)
& Device Mode
 ThisitemiscongurableonlywhenParallel Port is set to Enabled. Selects an operating mode for the
onboardparallel(LPT)port.Optionsare:StandardParallelPortMode(Default),EPPMode(Enhanced
ParallelPort),ECPMode(ExtendedCapabilitiesPort),EPPMode&ECPMode.
` Intel(R) Smart Connect Technology
& ISCT Support
Enables or disables Intel
®
SmartConnectTechnology.(Default:Disabled)
` Realtek PCIe GBE Family Controller
Thissub-menuprovidesinformationonLANconguration.
2-6 Power Management
& Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled. AutoletstheBIOSautomaticallycongurethis
setting.(Default:Auto)
& Resume by Alarm
 Determineswhethertopoweronthesystematadesiredtime.(Default:Disabled)
If enabled, set the date and time as following:
- 30 -