GN-BTP01 Bluetooth USB Printer Adapter
8
Step8. The configuration screen of the printer will appear when the printer driver is
installed completely. Select the Bluetooth Port of the printer which you have
been installed on the Ports page.(For example, ‘port’: Gigabyte, ‘Description’:
Bluetooth Port, ‘Printer’: hp deskjet 920c series ) And then go to the General
page.
Step9. Click the “Print Test Page” button on the General page. If the test page can
print out successully, the setting is completed. (When data are transmitting, the
Blue LED will blinking.) And now, you can use the printer through Bluetooth
USB Printer Adapter to print from any application as you normally would.
Notice: Once you had finished the Bluetooth printer installation setting, you can print
any document through the Bluetooth device even the printer does not appear
in the “Entire Bluetooth Neighborhood”.
To Next Page
Loading...