Gigabyte H110-D3A - Peripherals

2-5 Peripherals
& Initial Display Output
 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIExpressgraphicscardortheonboard
graphics.
IGFX   Setstheonboardgraphicsastherstdisplay.
PCIe1Slot SetsthegraphicscardonthePCIEX16slotastherstdisplay.(Default)
& OnBoard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& Above4GDecoding
Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system
supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and
their drivers are not able to be launched when entering the operating system (because of the limited 4 GB
memory address space). (Default: Disabled)
& AmbientLED
Enables or disables the onboard audio LED function. (Default: On)
& IntelPlatformTrustTechnology(PTT)
Enables or disables Intel
®
PTT Technology. (Default: Disabled)
` OffBoardSATAControllerConguration
Displays information on your SSD if installed.
` TrustedComputing
Enables or disables Trusted Platform Module (TPM).
` SuperIOConguration
& Serial Port
Enables or disables the onboard serial port. (Default: Enabled)
- 30 -