Gigabyte H262-Z6A - NTB Common Options

- 127 - BIOS Setup
5-3-6 NTB Common Options
Parameter
Description
NTB Common Options
NTB Enable
Options available: Auto/Enabled. Default setting is Auto.
NTB Location
(Note)
Options available: Auto/Enabled. Default setting is Auto.
NTB active on PCIeCore
(Note)
Options available: Auto/Enabled. Default setting is Auto.
NTB Mode
(Note)
Options available: Auto/Enabled. Default setting is Auto.
Link Speed
(Note)
Options available: Auto/Enabled. Default setting is Auto.
(Note) This item appears when NTB Enable is set to Enabled.