Gigabyte H282-Z60 - Front Panel LED and Buttons

System Appearance - 19 -
2-3 Front Panel LED and Buttons
No. Name Color Status Description
1.
Reset Button Press the button to reset the system.
2.
System
Status LED
Green On System is operating normally.
Amber
On
Critical condition, may indicates:
System fan failure
System temperature issue
Blink
Non-critical condition, may indicates:
Redundant power module failure
Temperature and voltage issue
N/A Off
Non-critical condition, may indicates:
Redundant power module failure
Temperature and voltage issue
3.
Power button
with LED
Green On System is powered on
Green Blink System is in ACPI S1 state (sleep mode)
N/A Off
• System is not powered on or in ACPI S5 state (power
off)
• System is in ACPI S4 state (hibernate mode)
4.
ID Button
with LED
Blue On System identication is active.
N/A Off System identication is disabled.
4 3 2 1