Gigabyte M27F A User Manual

- 12 -
4. Lift the monitor to an upright position and place it on a table.
5. Remove the small block of EPS foam located in between the rear of the
screen and the stand. Then remove the safety plate from its slot.
Note: By removing the safety plate, you can now adjust the screen to the
desired height.
1
2

Gigabyte M27F A Specifications

General

Panel type	SS-IPS
Color depth	8 bit
Color gamut	99 %
Pixel pitch	0.3108 x 0.3108 mm
Screen shape	Flat
Backlight type	Edge LED
Display diagonal	27 \
Native aspect ratio	-
Contrast ratio (typical)	1000:1
Display brightness (typical)	400 cd/m²
High Dynamic Range (HDR) supported	Yes
RMS rated power	6 W
Number of speakers	2
Product color	Black
Market positioning	Gaming
DisplayPort version	1.2
Tilt angle range	-5 - 20 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
Power supply type	Internal
Energy efficiency scale	A to G
Power consumption (off)	0.3 W
Power consumption (standby)	- W
Power consumption (typical)	28 W
Power consumption (PowerSave)	0.5 W
Cables included	AC, HDMI, USB
Package type	Box
Package depth	509 mm
Package width	738 mm
Package height	222 mm
Package weight	10747 g

Weight and Dimensions

Depth (with stand)	229.33 mm
Width (with stand)	615.7 mm
Height (with stand)	517.49 mm
Weight (with stand)	7500 g
Depth (without stand)	59.9 mm
Height (without stand)	371.15 mm
Weight (without stand)	5600 g