Gigabyte M27F A User Manual

- 14 -
Installing a Wall-Mount Bracket (Optional)
Use only a 100 x 100 mm VESA compatible wall mount kit.
1. Place the monitor on the lower EPS foam, with the screen facing down.
2. Push the release button upwards to disengage the stand from the
monitor.
Then remove the stand.
3. Attach the mounting bracket to the mounting holes at the rear of the
monitor. Then use the screws to secure the bracket in place.
Note: To mount the monitor on the wall, refer to the installation guide
that is included in the wall-mount bracket kit. VESA mounting screw size:
M4 x 20mm minimum.

Gigabyte M27F A Specifications

General

Panel type	SS-IPS
Color depth	8 bit
Color gamut	99 %
Pixel pitch	0.3108 x 0.3108 mm
Screen shape	Flat
Backlight type	Edge LED
Display diagonal	27 \
Native aspect ratio	-
Contrast ratio (typical)	1000:1
Display brightness (typical)	400 cd/m²
High Dynamic Range (HDR) supported	Yes
RMS rated power	6 W
Number of speakers	2
Product color	Black
Market positioning	Gaming
DisplayPort version	1.2
Tilt angle range	-5 - 20 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
Power supply type	Internal
Energy efficiency scale	A to G
Power consumption (off)	0.3 W
Power consumption (standby)	- W
Power consumption (typical)	28 W
Power consumption (PowerSave)	0.5 W
Cables included	AC, HDMI, USB
Package type	Box
Package depth	509 mm
Package width	738 mm
Package height	222 mm
Package weight	10747 g

Weight and Dimensions

Depth (with stand)	229.33 mm
Width (with stand)	615.7 mm
Height (with stand)	517.49 mm
Weight (with stand)	7500 g
Depth (without stand)	59.9 mm
Height (without stand)	371.15 mm
Weight (without stand)	5600 g