- 34 -
Quick Switch Assign the function of the hot keys.
Available options: Aim Stabilizer sync, Black Equalizer,
Low Blue Light, Volume, Input, Contrast, Brightness,
and Picture Mode.
The default setting of the hot keys as below:
Up ( ): Black Equalizer
Down ( ): Picture Mode
Right ( ): Volume
Left ( ): Input
Other Settings • Resolution Notice: When this function is enabled,
the recommended resolution message will
appear on the screen when the monitor switches
to another input source.
• Input Auto Switch: When this function is enabled,
it automatically switches to an available input
source.
• Auto Power OFF: When this function is enabled,
the monitor will automatically turn off after a
certain amount of time.
• LED Indicator: By default, the LED indicator is set
to Always ON.
Always ON: The Power LED lights white during
operation .
Always OFF: Turn off the Power LED.
Standby ON: The Power LED lights white in
standby mode.
When the power supply is switched off, the
Power LED will remain off.
• Type-C Compatibility: Turn this option on to
improve mobile devices compatibility.
• HDMI-CEC: When enable this function, CEC device
like PS5, XBOX could turn on the monitor when
they are waken up and switch off the display when
they enter either Standby or off mode.
• USB(A/C) Charge: Enable or disable the
USB Type-A charging And USB Type-C
charging(5V/3A,9V/3A,12V/3A,15V/3A) function
in standby mode.