Gigabyte M27QA - Page 8

- 8 -
• Move the Control button right ( ) to enter the Input menu. Refer to the
“Selecting the Input Source” section.
Note: To close the Quick Switch menu, move the Control button left ( ).
• Move the Control button left ( ) to enter the Volume menu.
Move the Control button up/down ( )
to select the desired volume and press
the Control button to confirm.
ExitSelect
Picture Mode
Standard
FPS
RTS/RPG
Movie
Reader
sRGB
• Move the Control button down ( ) to enter the PictureMode menu.
Move the Control button up/down ( )
to select the desired option and press
the Control button to confirm.
ExitAdjust
Volume
50