Gigabyte M27QA - Selecting the Input Source; Operations; Quick Switch Menu

- 7 -
OPERATIONS
QuickSwitchMenu
By default, the Control button has been assigned with the specific function.
Note: To change the preset functions, refer to the “Quick Switch” section on page 18.
To access the Quick Switch functions, do the following:
• Move the Control button up ( ) to enter the BlackEqualizer menu.
Move the Control button up/down
( ) to adjust the setting and press the
Control button to confirm.
SelectingtheInputSource
1. Move the Control button right ( ) to
enter the Input menu.
2. Move the Control button up/down ( )
to select the desired input source. Then
press the Control button to confirm.
ExitSelect
Input
HDMI 1
HDMI 2
DisplayPort
Type-C
ExitAdjust
0
Black Equalizer