Gigabyte MS33-AR1 - Installing the M.2 SSD Module

- 17 -
Hardware Installation
1-5 Installing the M.2 SSD Module
Follow the steps below to install a M.2 SSD module on your motherboard:
Step1. Insert the M.2 SSD module into the slot.
Step2. Secure it with the screw, tightening as necessary to fasten the M.2 SSD module in place.
1
2
CAUTION
The position of the stand-off screw will depend on the size of the M.2 device. Refer to the size of the
M.2 device and change the position of the stand-off screw accordingly.