Gigabyte MS33-AR1 - Page 21

- 21 -
Hardware Installation
4) SSATA0/SSATA2 (SATA III 6Gb/s Connectors)
The SATA connectors conform to SATA III 6Gb/s standard and are compatible with SATA 3Gb/s standard.
Each SATA connector supports a single SATA device.
PinNo. Denition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
1
7
5) SSATA_SGP1 (SATA SGPIO Connector)
Serial General Purpose Input/Output (SGPIO) is a communication method used between a host bus adapter
(HBA) and a main board.
Pin No. Denition
1 DATAOUT
2 GND
3 NC
4 Load
5 Clock
1 5