Gigabyte MSH61DI - Page 36

BIOS Setup - 36 -
PIO Mode
This feature allows you to set the PIO (Programmed Input/Output) mode for the two IDE devices (Master
and Slave drives) attached to that particular IDE channel.
Option available: Auto/Disabled. Default setting is Auto.
PIO Mode
This feature allows you to set the PIO (Programmed Input/Output) mode for the two IDE devices (Master
and Slave drives) attached to that particular IDE channel.
Option available: Auto/Disabled. Default setting is Auto.
DMA Mode
Congure the DMA mode of the device in the specic IDE channel.
Option available: Auto/Disabled. Default setting is Auto.
S.M.A.R.T Mode
This feature allows you to set the PIO (Programmed Input/Output) mode for the two IDE devices (Master
and Slave drives) attached to that particular IDE channel.
Option available: Auto/Disabled. Default setting is Auto.
S.M.A.R.T Mode
This option enables/disables support for the hard disk's S.M.A.R.T. capability. The S.M.A.R.T. (Self Moni-
toring Analysis And Reporting) technology is supported by all current hard disks and it allows the early
prediction and warning of impending hard disk disasters.
Option available: Auto/Disabled. Default setting is Auto.
32Bit Data Transfer
Congure the 32Bit Data Transfer rate.
Option available: Auto/Disabled. Default setting is Auto.