- 28 -
& Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities
Species the boot order for a specic device type, such as hard drives, optical drives, oppy disk drives,
and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu that
presents the devices of the same type that are connected. This item is present only if at least one device
for this type is installed.
& Fast Boot
Enables or disables Fast Boot to shorten the OS boot process. (Default: Disabled)
& SATA Support
All Sata Devices All SATA devices are functional in the operating system and during the POST.
(Default)
Last Boot HDD Only Except for the previous boot drive, all SATA devices are disabled before the OS
boot process completes.
This item is congurable only when Fast Boot is set to Enabled.
& VGA Support
Allows you to select which type of operating system to boot.
Auto Enables legacy option ROM only.
EFI Driver Enables EFI option ROM. (Default)
This item is congurable only when Fast Boot is set to Enabled.
& USB Support
Disable All USB devices are disabled before the OS boot process completes.
Full Initial All USB devices are functional in the operating system and during the POST.
Partial Initial Part of the USB devices are disabled before the OS boot process completes.
(Default)
This item is congurable only when Fast Boot is set to Enabled.
& NetWork Stack Driver Support
Disable Disables booting from the network. (Default)
Enable Enables booting from the network.
This item is congurable only when Fast Boot is set to Enabled.
& New Boot Option Policy
Allows you to determine whether to change the boot order when a new device is added.
Dedault Keeps the previous boot order settings. (Default)
Place First Set the newly added device as the rst boot device.
Place Last Set the newly added device as the last boot device.
To Next Page
Loading...
Need help?
General
