English
8
Build a Recovery Image USB
1
2
3
4
5
6
>20G
• You must use a minimum 20GB capacity
USB to build a Recovery Image USB. Plug
the USB into the laptop you would like to run
the Smart Recovery on.
• Inse r t th e Dr iver dis c . Run the Smar t
Recover y Generator. (For without ODD
model, please use external USB ODD)
• Select your language.
• Execute SmartRecoveryGenerator.
• Select your device from the drop down menu
available under Removable Storage List.
Click > Create an Image.
• Wait until the Ready window pops up. Now the Image is ready in your Recovery USB.
• If you need to run system recovery in the future, please boot up your computer with this
"recovery USB". To do that, press F12 when computer starts, choose your USB as a boot
device and wait until the sys
tem restarts and takes you to the Windows 8 Screen.
• It may take more than thirty minutes to run the System Recovery.
WARNING
●
Since the default system set up on your notebook is RAID 0/1, you will need this utility to build a recovery
USB in order to recover your laptop and undo RAID settings.
●
Recovery USB will recover your notebook to factory default settings. Please backup your data before
recovering your system through the recovery USB.
●
Please do not unplug power cord or turn off the power during the process of system recovery.
To Next Page
Loading...
