Gigabyte R181-Z90 - Installing a Memory; DIMM Population Table

- 27 - System Hardware Installation
3-4-2 Installing a Memory
Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on this motherboard.
Follow these instructions to install the Memory:
1. InserttheDIMMmemorymoduleverticallyintotheDIMMslot,andpushitdown.
2. ClosetheplasticclipatbothedgesoftheDIMMslotstolocktheDIMMmodule.
3. ReversetheinstallationstepswhenyouwanttoremovetheDIMMmodule.
1
2
2
3-4-3 DIMM Population Table
RDIMM Maximum Frequency Supported Tablel
Slots
DIMMs
Populated
DIMM
1R
2
2
1
--
--
--
--
--
--
2667
2400
Not Supported
Not Supported
Not Supported
Not Supported
2133
2133
2133
1
11
1
1
1
1
--
--
-- --
2667
2667
Not Supported
1
1
1
2
2
--
----
--
1
1
11
2
4DR 1.2V
2R
2DR
Frequency (MT/s)