Gigabyte R182-Z91 - Page 22

System Appearance -21-
2-3-2 R182-Z91 / R182-Z92
L1 L2
2
4
6
8
1
3
5
7
No. Name Color Status Description
1.
Reset Button -- -- Pressthebuttontoresetthesystem.
2.
NMIbutton -- --
PressthebuttonservergeneratesaNMItotheprocessor
ifthemultiple-bitECCerrorsoccur,whicheffectivelyhalt
theserver.
3.
Powerbutton
withLED
Green On Indicatesthesystemispoweredon.
Green Blink SystemisinACPIS1state(sleepmode).
N/A Off
• SystemisnotpoweredonorinACPIS5state(poweroff)
• SystemisinACPIS4state(hibernatemode)
4.
IDButton Pressthebuttontoactivatesystemidentication
5.
HDD Status
LED
Green
On
IndicateslocatingtheHDD.
Blink
IndicatesaccessingtheHDD.
Amber On
IndicatesHDDerror.
Green/
Amber
Blink
IndicatesHDDrebuilding.
N/A Off
IndicatesnoHDDaccessornoHDDerror.
6.
System
Status LED
Green On
Indicatessystemisoperatingnormally.
Amber
On
Indicatesacriticalcondition,mayinclude:
-System fan failure
-System temperature
Blink
Indicatesnon-criticalcondition,mayinclude:
-Redundantpowermodulefailure
-Temperature and voltage issue
-Chassisintrusion
N/A Off
Indicatessystemisnotready,mayinclude:
-POST error
-NMIerror
-Processor or terminator is missing
7/8.
LAN1/2
Active/Link
LEDs
Green On
Indicatesalinkbetweenthesystemandthenetworkor
no access.
Green Blink
Indicatesdatatrasmissionorreceivingisoccuring.
N/A Off
Indicatesnodatatransmissionorreceivingisoccuring.