Gigabyte R262-ZA0 - Page 13

- 13 - Hardware Installation
Expansion Slot
 Riser Card CRS101E:
- 1 x PCIe x16 slot (Gen4 x16), Full height half-length
 Riser Card CRS101E:
- 1 x PCIe x16 slot (Gen4 x8 or x16), shared with OCP 2.0, Full height half-
length ( Please see NOTE below)
 1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth
 1 x OCP 2.0 mezzanine slot with PCIe Gen3 x0 or x8 bandwidth, shared with
CRS101E ( Please see NOTE below)
NOTE:
1. GIGABYTE offers an optional riser card to support full bandwidth
PCIe Gen4 x16 and OCP 2.0 Gen3 x8
2. Contact GIGABYTE sales rep or technical support for more details about
supporting full bandwidth
Storage
 ront side: 24 x 2.5" SATA/ SAS hot-swappable SSD bays
 Rear side: 8 x 2.5" SATA/ SAS, 2 x 2.5" U.2 hot-swappable SSD bays
 Internal: 8 x 2.5" SATA/ SAS hot-swappable SSD bays
SAS card is required to enable the drive bays
• Broadcom SAS35x48 expander
• Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
• Default conguration supports:
• 40 x SATA/ SAS, 2 x U.2 drives
Suggested 12Gb/s SAS cards:
• CRA4648
• CSA4648
1 x M.2 slot:
- M-key
- PCIe Gen4 x4
- Supports NGFF-2280/22110 cards