Gigabyte X299-WU8 - Page 69

- 69 -
Conguring a RAID Set
C-1. Using EZ RAID
GIGABYTEmotherboardsprovideyouwith theEZRAIDfeature,allowingyouto quicklycongureaRAID
arraywithsimpliedsteps.
Step 1:
After restarting the computer, enter the BIOS Setup and go to Peripherals. Press <Enter> on the EZ RAID item.
SelectthetypeofharddrivesyouuseforRAIDintheTypetabandthenpress<Enter>(Figure2).
Figure 2
Figure 3
Step 2:
Go to the ModetabtoselectaRAIDlevel.RAIDlevelssupportedincludeRAID0,RAID1,RAID10,andRAID5
(theselectionsavailabledependonthenumberoftheharddrivesbeinginstalled).Thenpress<Enter>tomove
to the Create tab. Click Proceedtobegin(Figure3).