Gigabyte Z490 VISION D - Page 69

- 69 -
Conguring a RAID Set
Step 5:
After setting the capacity, move to Create Volume and press <Enter> to begin. (Figure 10)
After completing, you'll be brought back to the Intel(R) Rapid Storage Technology screen. Under RAID Volumes
youcanseethenewRAIDvolume.Toseemoredetailedinformation,press<Enter>onthevolumetocheckfor
informationonRAIDlevel,stripeblocksize,arrayname,andarraycapacity,etc.(Figure11)
Figure 10
Figure 11