Made in Germany
© Gigahertz Solutions GmbH - 25 - May 2017
View
“Edge Display”
Choose the menu option “View/Edge Display” to activate the
edge display (displayed as “bar” above the graph). The edge
display option will help find important field strength fluctua-
tions. Steep edges are marked in the diagram in the colour
corresponding to each channel – the marked channel will be
bolded, the others won’t. This way you will always have an
overview of what’s going on in the other channels, even if
your focal point is, for instance, the 3D-value. The threshold
value for an edge display can be defined in the menu option
“Channel/Set edge criteria”.
“Set Times”
Choose the “Set Times“ option to scale the graphic to a de-
fined time segment.
“Y-Scale“
Automatic – The y-axis will be scaled automatically to
give the best display of the area selected for analysis.
Manual – The y-axis scaling can be manually controlled
in this mode. Allows for and will assist in analyzing small
values (e.g. those over 2 kHz) overshadowed by other
very strong field intensities.
“All” – zooms out the x-axis and displays the complete data
set on the data plot. The keyboard “A” keys can alternative-
ly be used.
Use the arrow keys to take over the functions of the mouse.
Channel
Set Edge Criteria (experimental!)
This feature is new and its
intention is to facilitate pro-
fessionals the dicussion and
analysis of “dirty electricity”
beyond today’s definition.
Activate “Edge Display” in
the menu option “View” to
use this function.
This function allows you to
define a threshold value with
which a spike can be marked
directly in the “Edge Display”
of the plot. This threshold can be selected individually for
every channel. Standard values have been pre-selected as
defaults.
To Next Page
Loading...
Need help?
General
