To Next PageTo Next Page
Need help?Do you have a question about the Gigaset 5020 and is the answer not in the manual?
General| Type | Corded Telephone |
|---|---|
| Caller ID | Yes |
| Call waiting | Yes |
| Redial | Yes |
| Volume control | Yes |
| Battery backup | No |
| Ringer | Adjustable |
| Power source | Mains powered |
Codes indicating pause, memory status, and phone lock.
Codes for tone dialling, call waiting, forwarding, and messages.
Precautions for connecting, operating, and positioning the telephone safely.
Warnings regarding heat, moisture, cleaning, and handling the telephone.
Guidelines for optimal placement and environmental conditions for the telephone.
Step-by-step instructions for connecting the handset and phone line.
Procedure to set the current time on the telephone display.
Instructions on how to dial numbers using the handset or keypad.
How to activate and deactivate handsfree mode during or before calls.
Using last number redial and dialing from the redial list.
Saving and dialling numbers using the repertory keys.
Methods for saving numbers into the phone's memory.
Setting the ringer volume and the frequency of the ring tone.
Choosing from ten different ringtones for incoming calls.
Adjusting handset volume and activating/deactivating the mute function.
Adjusting the loudspeaker volume during handsfree calls.
Setting a number for automatic dialling when the phone is locked.
How to lock and unlock the telephone to prevent unauthorized calls.
Activating or deactivating the display of call duration.
Configuring the duration of pauses used in dialling.
Switching between tone and pulse dialling modes.
Managing external line prefixes for PABX systems.
Setting the flash time for the Recall key for system services.
Conditions and display for incoming call number identification.
Viewing, scrolling, and interacting with the calls list.
Deleting all entries or individual entries from the calls list.
Configuring the display of area codes for incoming calls.
Understanding the display for new messages from network providers.
Assigning and using repertory keys for specific telephone functions.
Process for assigning new functions or changing existing ones on keys.
Storing call forwarding settings on repertory keys.
How to activate call forwarding using a pre-assigned function key.
Deactivating call forwarding using a function key.
Solutions for problems like no signal, dialling errors, and display issues.
Information on obtaining label inserts and seeking support.
