What to do if my Gigaset IP Phone says 'Base flashes'?
If your Gigaset IP Phone displays 'Base flashes,' it indicates a lost wireless connection. This could be because the handset is too far from the base. Try moving it closer. Alternatively, the base might not be switched on. In that case, check the mains plug on the base.
General| Standby time | 130 h |
|---|---|
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Number of batteries supported | 2 |
| Type | DECT telephone |
| Intercom | - |
| Answering machine | No |
| Maximum indoor range | 50 m |
| Maximum outdoor range | 300 m |
| Mounting type | Desk |
| Product color | Black |
| Phonebook capacity | - entries |
| Caller ID | Yes |
| Operating temperature (T-T) | 5 - 45 °C |
| Operating relative humidity (H-H) | 20 - 70 % |
| Number of handsets included | 1 |
To Next Page
