8
Lombok A150-A150A-A250-A250A / BE-NL en / A31008-M2702-M201-1-3F19 / Lombok.fm / 22.08.2016
Version 4, 16.09.2005
Calls list/answer machine list/network mailbox list
Press MENU ¤ Messages ¤ OK, to open the list overview. If you have new messages, only lists with new messages are
displayed. Scroll through the lists by pressing
u.
An advisory tone sounds as soon as a new entry appears in the calls list/answer machine list/ne
twork mailbox list. New
messages appears in the display.
Calls list
Prerequisites: CLIP (¢ S. 6)
Depending on the type of list se
t, the calls list contains (¢ S. 17) answered calls, missed calls and calls recorded from the
answer machine (A150A/A250A only).
Depending on the type of list set, all numbe
rs of the last 25 incoming calls are saved or just the missed calls are saved.
Open the calls list
MENU
¤ Messages ¤ OK ¤ u CallsList
The calls list is displayed as follows:
Number of new entries + number
of old, read entries
Press OK to open the list.
The last incoming call is displayed. If necessary, use
u to select another entry.
Using other functions
u (select entry) ¤ MENU
The following functions can be selected with
u: Delete Entry/Copy to Dir./Date/Time/Status/Delete List
Calling back a caller from the calls list
MENU
¤ Messages ¤ CallsList 01+02 ¤ OK ¤ u (select entry) ¤ b
Answer machine list (A150A/A250
A only)/network mailbox list
You can use these lists to listen to messages on the answer machine (see "Playing back/deleting messages" ¢ S. 8) or
network mailbox (
¢ S. 10).
Operating the answer machine (A150A/A250A only)
The answer machine is operated from the handset or via the keys on the base (¢ S. 2). You can record your own
announcement messages using the handset. The pre-recorded announcement is used if no personal announcement is
av
ailable.
If the memory is full, Memory full! appears in the display and the answer machin
e switches itself off automatically. It
activates again automatically when you delete old messages.
The answer machine has already been preset at the factory. Make individual settings using the handset.
How to set a delay time (time period after which you would like the answer
machine to answer a call), as well as how to
set the recording length and activate call screening during the recording, see menu overview
¢ S. 16.
Activating/deactivating the answer machine
MENU ¤ u Answer Machine ¤ OK ¤ u Answer Mach. ¤ OK (
‰
= on)
When you switch on the answer machine, the
± icon appears in the display.
Recording your own announcement
MENU ¤ u Answer Machine ¤ OK ¤ u Announcements ¤ OK ¤ Rec announce ¤ OK ¤ Speak after OK ¤ OK
You hear the ready tone (short tone). Now say your announcement (at least 3 sec.). Press OK to confirm or press
a or ”
to reject your recording. After recording, the announcement is played back for you to check.
Please note:
Recording ends automatically when the max. recording time of 170 seconds is reached or if there is a break in speaking
of mor
e than 2 seconds.
Playing back or deleting announcements
See menu overview ¢ S. 16.
Playing back/deleting messages
There are three ways to start playing back messages on the answer machine.
◆ Start message playback via the Answer Machine menu:
MENU
¤ u Answer Machine ¤ OK ¤ u Play Messages ¤ OK
Please note
If calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made
(
depending on your network provider).
To Next Page
Loading...
