32
Gigaset C620-C620A / LUG - UK-IE / A31008-M2403-L101-1-7619 / settings.fm / 4/29/13
Template Borneo, Version 1, 21.06.2012
Changing the system PIN
Gigaset Repeater (earlier than version 2.0)
Prerequisites:
u EC
O DECT function Maximum Range must be activated.
u ECO DECT function No Radiation must be deactivated.
u Encryption must be deactivated:
v
¤ Ï ¤ OK ¤ q System ¤ OK ¤ q Encryption ¤ Change (´ = deactivated)
Modifying the ECO DECT functions
¢ page 33.
Registering a repeater:
¤Connect the repeater to the mains power supply. ¤ Press and hold (min. 3 secs) the
Registration/Paging key on the base (C620A
¢ page 2, C620 ¢ page 3). ¤ The repeater regis-
ters automatically.
You can register up to 6 repeaters.
Gigaset Repeater 2.0
Registering the Gigaset Repeater 2.0:
¤Connect the repeater to the mains power supply. ¤ Press and hold (min. 3 secs) the
Registration/Paging key on the base (C620A
¢ page 2, C620 ¢ page 3). ¤ The repeater regis-
ters automatically.
You can register a maximum of 2 Gigaset Repeaters 2.0.
The ECO DECT function Maximum R
ange is activated and No Radiation is deactivated. The set-
tings cannot be changed whilst the repeater is registered.
De-registering the Gigaset Repeater 2.0:
v ¤ Ï ¤ OK ¤ q System ¤ OK ¤ q Repeater ¤ OK ¤ q Select repeater. ¤ De-reg.
Changing the system PIN
v ¤ Ï ¤ OK ¤ q System ¤ OK ¤ q System PIN ¤ OK
¤ If current PIN not 0000: enter current PIN ¤ OK
¤ Enter new system PIN (4 digits; 0 - 9) ¤ Save
Resetting system PIN
If you have forgotten your system PIN, you can reset it to 0000. If you do this, all the base
settings will be reset and all the handsets will be de-registered!
¤ Remove the power cord from the base.
¤ Press and hold the Registration/Paging key (C620A ¢ page 2, C620 ¢ page 3) and at the
same time reconnect the power cord to the base.
¤ Hold the Registration/paging key for at least 5 seconds.
To Next Page
Loading...
