Gigaset C620 - Connecting the Charging Cradle; Setting Up the Handset for Use; Inserting Batteries and Closing Battery Cover

8
Gigaset C620-C620A / LUG - UK-IE / A31008-M2403-L101-1-7619 / starting.fm / 4/29/13
Template Borneo, Version 1, 21.06.2012
Getting started
Connecting the charging cradle (if included)
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries and closing the battery cover
¤ Connect the flat plug to the charging cradle .
¤ Plug the power adapter into the power socket .
If you have to remove the plug from the charging cradle
again:
¤ Disconnect the power adapter from the mains
power supply.
¤ Press the release button and disconnect the
plug .
1
2
3
4
2
1
3
4
Caution
Use only rechargeable batteries recommended by Gigaset Communications GmbH
(
¢ page 69) , as this could otherwise result in significant health risks and personal injury. For
example, the outer casing of the batteries could be destroyed or the batteries could explode.
The phone could also malfunction or be damaged as a result of using batteries that are not
of the recommended type.
¤ Insert the batteries
with the polarity in
the right direction (for
correct +/- direction,
see diagram).
¤ First insert the battery
cover on the top .
¤ Then press the cover
until it clicks into
place.
1
2
1
2
To open the battery cover, for
example to change the batter-
ies:
¤ Grip the notch on the side of
the cover and pull the
battery cover upwards .
3
4
4
3