Gigaset COMFORT 552 A / LUG_Kombi_USA US en / A31008-M3001-R301-1-3S19 / settings_BS.fm / 5/31/22
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
System
59
System
Date and time
To ensure you have the correct time for incoming calls and to use the alarm clock and calendar,
for example, the date and time must be set.
If the date and time have not yet been set on the handset, the display key Ti
me appears.
Press the display key Time
or
Entering your own local area code
Please note the following for local calls (calls using the local fixed line network):
• For local calls using the fixed line network, it is generally (depending on the exchange) not
necessary to dial an area code. All the calls in the call list are saved with area codes. In order
to be able to call back a caller from the call list, you have to save the local area code in the
phone for the area in which your phone is located (Own Area Code). If your phone is in a
"multiple area code" area, you also have to enter the other area codes for this area as Extra
Area Codes.
Entering own local area code
Entering extra codes
Repeat the steps above for all extra codes for your area. You can save a maximum of five
extra codes.
Save
Settings OK Date/Time OK . . . then
Set the date:
Date: use to enter the month, day and year in 8-digit format
Set the time:
Time enter hours and minutes in 4-digit format
Switch between am and pm if applicable with the display key AM/
PM.
Save settings:
Save
Settings OK Telephony Own Area Code OK enter
own area code (maximum of 3 characters, "*", "#" are permitted) Save
Settings OK Teleph ony Extra Area Codes OK
select entry ("– – –" = empty entry) delete any extra codes entered before
use to enter extra code (maximum of 3 characters, "*", "#" are permitted)
To Next Page
Loading...
Need help?
General
