Gigaset Repeater User Manual (English)

Questions and Answers:

R
Ryan WrightJul 26, 2025
What to do if there is no reception of the handset in the area of the Gigaset Repeater?
- D
  David LoweJul 27, 2025
  If your handset isn't receiving a signal in the repeater's area, several factors could be at play. First, the repeater might not be correctly registered; in this case, repeat the registration process. Second, there may be no radio connection to the base station; try selecting a new location for the repeater. Finally, the handset itself might not be finding the repeater; try switching the handset off and on again.
L
ldownsAug 4, 2025
Why the left LED does not light up at all on my Gigaset ?
- A
  amanda17Aug 4, 2025
  If the left LED isn't lighting up at all, the issue is likely a lack of power. Check the power point to ensure the repeater is receiving electricity.
B
Brandon DoughertyAug 10, 2025
How to fix the issue when the left LED flashes continuously on Gigaset after registration?
- J
  Julia ScottAug 10, 2025
  If the left LED on your Gigaset Repeater flashes continuously after registration, it indicates that there is no radio connection to the base station. To resolve this, repeat the registration process.
G
Gabriela DominguezAug 18, 2025
What to do if the left LED flashes continuously at a selected location on Gigaset Repeater?
- E
  Elizabeth CrawfordAug 18, 2025
  If the left LED on your Gigaset Repeater is continuously flashing, it means there's no radio connection to the base station at the current location. Try selecting a new location for the repeater.

Gigaset Repeater Specifications

General

Frequency Range	1880 - 1900 MHz
DECT standard	DECT
Number of handsets supported	Up to 6
Plug type	EU
Range	Up to 50 meters indoors
Encryption	DECT Standard Encryption