7
Viewing Photos on Your Frame
Your frame can read memory cards up to 8GB. It
automatically displays saved photos and photos from a
memory card in the SD/MMC/XD/MS slot.
1. Press the POWER button to turn on the frame.
2. Insert a memory card into the labeled slot. The frame
enters Slide Show mode after several seconds.
3. Press PLAY/PAUSE/MODE to enter Browse mode.
The frame displays a single image. Use the PREV
and NEXT buttons to select a photo.
4. Press
PLAY/PAUSE/MODE again to enter Thumbnail
mode. Small images of the memory card’s contents
appear. Use the PREV, NEXT, UP, and DOWN
buttons to navigate the pictures.
n Note: The aspect ratio of the screen is 4:3. Photos
with different ratios (for example, 5 × 7 or 4 × 6 photos)
appear with black bars on the sides. Photos shot in
Panoramic mode (with a 4:3 ratio) appear without the
bars. This is a normal function of the frame designed to
retain image quality.
Copying Photos to Your Frame
To copy photos from a memory card to the frame’s
memory:
1. Locate the photo and press UP/COPY/DELETE.
To Next Page
Loading...
