Need help?Do you have a question about the Gilbarco Veeder-Root Encore S Enhanced FlexPay EMV CRING and is the answer not in the manual?
Provides start-up and service information for FlexPay EMV CRIND components on Encore S Enhanced units.
Lists necessary tools for installing FlexPay EMV CRIND components on Encore S Enhanced units.
Lists associated manuals and guides for FlexPay EMV CRIND and related systems.
Defines technical terms and acronyms used throughout the manual for clarity.
Explains the system site configuration and component connections for FlexPay EMV CRIND.
General safety precautions for working with potentially dangerous environments and equipment.
Instructions on how to perform an emergency total electrical shut-off for safety.
Explains warning symbols and signal words used in the manual for hazard communication.
Discusses hazards and precautions when working with fuels and electrical energy.
Recommended actions to mitigate hazards associated with collisions, fires, and fuel spills.
Details procedures for configuring CRIND IDs and Mode using diagnostic mode.
Guides on configuring setup and system configuration menu parameters.
Configuration steps for Bundle 5X.Y.ZZ, including card reader and printer settings.
Configuration steps for Bundle 6X.7.21, covering card reader, printer, and mode selection.
Instructions for configuring FlexPay EMV CRIND for Esso Speedpass tags.
Steps to configure the CRIND BIOS to enable TRIND functionality.
Procedures for replacing, activating, and configuring FlexPay EMV CRIND components.
Covers Service Menu navigation, options, and security setup for sensor activation.
Guides on using the Maintenance Tool for laptop setup, software loading, and resource management.
Addresses common issues like tamper errors, display, keypad, card reader, printer, and communication problems.
Indicates system package installation progress with a percentage bar.
Indicates alarms or errors running in the module(s).
Shows the system is activated, running, and waiting for a master device connection.
Indicates the system is running but not activated, leading to the Service Menu.
Displays start-up screen and reader offline messages for EMV card readers.
Provides a flowchart to diagnose and fix card reader offline issues.
Guides for resolving reader dismounted errors, including flowcharts for different reader types.
Troubleshooting steps for reader tampered screens and bad card reader certification errors.
Details the terms and conditions for using the OpenSSL software.
Details the terms and conditions for using the Original SSLeay software.
General| Brand | Gilbarco |
|---|---|
| Model | Veeder-Root Encore S Enhanced FlexPay EMV CRING |
| Category | Payment Terminal |
| Language | English |
To Next Page