NOTE: Please read all warnings and instructions before operating this unit. Failure to follow these
instructions and procedures can result in permanent damage to the equipment.
WARNING:
This unit is designed specifically for use with Gilian LFS-113, UL, and SCS intrinsically safe battery
packs and equipment. The unit should only be operated in environments that the unit's intrinsic safety
labeling permits. Do not operate in excessive chemical or water vapor atmospheres. Do not charge
sampler outdoors or in a damp environment. Use specified Gilian chargers only when recharging the
battery system. Use of any other charger may short out the battery or cause permanent damage to the
electrical system. Do not leave unit charging for more than 16 hours. Overcharging cells may cause
overheating and subsequent damage to/or decrease in battery life and performance.
Sensidyne, Inc.
16333 Bay Vista Drive • Clearwater, FL 33760
800-451-9444 • 727-530-3602
FAX 727-539-0550
6.0 SPECIFICATIONS
Operating Range: Constant flow mode: 5-200 cc/min., back pressures to 25" H
2
O
Constant pressure mode: (multi-tube) 1-350 cc/min. with flows adjustable through a
single or multiple tube flow controller.
Pressure Range: backpressure up to 25" H
2
O
Flow Control: ± 5% of set point
Battery System: Rechargeable, plug in, 4.8V, 500 mAh Ni-cad battery pack. Designed
to meet all UL requirements. Internal charging, (external charging with adapter).
Size: 2-1/2" W x 1-3/8" H x 4-5/8" L
Weight: 12 ounces
Temperature: Operating: -20° to 45 c° , Storage: -40° to 45 c° , Charging: 5° to 45 c°
Additional features: Flow fault indication LED, battery check LED, belt clip, dual
filtration system, sorbent tube end breaker, external flow adjust.
Options: Elapsed timer clock module: (offered on DC models), LCD display and
automatic instant-fault shut-down function, RFI shielding case.
Warranty: The LFS-113 dual mode low flow sampler is guaranteed for one year against
any defects in parts and/or workmanship.
page 19
To Next Page
Loading...