Gima KD-558 - User Manual

Other manuals for Gima KD-558

User Manual156 pages

Questions and Answers

L
ljohnsonAug 1, 2025
Why does my Gima KD-558 Blood Pressure Monitor LCD display show abnormal results?
- B
  brianna71Aug 1, 2025
  If the LCD display on your Gima Blood Pressure Monitor shows an abnormal result, it could be due to several reasons. First, ensure the cuff is positioned correctly and properly tightened. If your body posture was incorrect during testing, review the instructions for correct posture and re-test. Avoid speaking, arm or body movement, and remain calm during the test. Re-test if you were angry, excited, or nervous. Note that this monitor is not appropriate for people with serious arrhythmia.
M
Meghan AcostaAug 6, 2025
What to do if the Gima KD-558 Blood Pressure Monitor LCD shows low battery symbol?
- J
  jacksonstevenAug 6, 2025
  If the LCD of your Gima Blood Pressure Monitor shows a low battery symbol, it means the batteries are low and you should change them.
P
perezamberAug 11, 2025
How to fix a Gima KD-558 that doesn't respond to button presses or battery load?
- N
  Nichole RileyAug 11, 2025
  If your Gima Blood Pressure Monitor doesn't respond when you press a button or load the battery, it may be due to incorrect operation or strong electromagnetic interference. Remove the batteries for five minutes, and then reinstall them.
M
Melissa CampbellAug 16, 2025
What does error code “Er 3” mean on a Gima KD-558?
- K
  Kendra HawkinsAug 16, 2025
  If the LCD of your Gima Blood Pressure Monitor shows “Er 3”, it indicates that the pneumatic system is blocked or the cuff is too tight during inflation. Reapply the cuff correctly and try again.
M
michele22Aug 21, 2025
What does error code “Er 5” mean on a Gima KD-558 Blood Pressure Monitor?
- Y
  ybergAug 21, 2025
  If the LCD of your Gima Blood Pressure Monitor displays “Er 5”, it means the cuff pressure is above 300mmHg. Wait five minutes and measure again. If the monitor is still abnormal, please contact the local distributor or the factory.
C
Christopher PerezAug 27, 2025
What does error code “Er 0” mean on a Gima KD-558?
- J
  John HansenAug 27, 2025
  If the LCD of your Gima Blood Pressure Monitor shows “Er 0”, it indicates that the pressure system is unstable before measurement. Don’t move and try again.