Gima KD-558 - Deleting Measurements from the Memory

32
Picture 7-8 Picture 7-9
e. When displaying the stored results, the monitor will turn off automatically
after 1 minute of no operation. You can also press the button “START”
to turn off the monitor manually.
8. Deleting measurements from the memory
When any result (except average reading of the last three results)
is displaying, keeping on pressing button “MEM” for three seconds,
all results in the current memory bank will be deleted after three “beep”.
LCD will show picture 8, Press the button “MEM” or “START”, the monitor
will turn off.
Picture 8
ENGLISH