To connect a kite leash (for un-hooked riding)
1. Hold the connector of your kite leash.
2. Connect the kite leash to the fixed metal leash ring. That's all ! No need to release the
safety leash.
To connect a "suicide leash" (for un-hooked riding without safety)
1. Hold the connector of your kite leash.
2. Connect the kite leash to the metal D-ring of the chicken-loop.
3. Ready to ride un-hooked with "suicide leash". This situation doesn't give you optimum
safety : if you let go of the bar, you will still be connected to the kite, which will remain
powered up.
To Next Page
Loading...
