Yeti UL front container manual: 17
Preflight check
The deployment handle and its strap must be connected to the deployment bag of the
parachute. In particular, check the length of the strap connecting the rescue deployment
handle to the rescue inner container. It should be long enough that the reserve can be
extracted without the danger of the pins not being pulled before the strap tightens on the
reserve, but not so long that there is excessive slack that extends the movement required
for deployment.
IMPORTANT: After you have finished packing the Yeti UL front container, you must do a test
deployment to ensure that it can be deployed correctly.
IMPORTANT: Make sure that both rescue bridles are connected with a main carabiner
on each side.
GIN quality and service
We take pride in the quality of our products and are committed to putting right any
problems affecting the safety or function of your equipment and which are attributable to
manufacturing faults. Your GIN dealer is your first point of contact if you have any problems
To Next Page
Loading...