Gio Electric Peak - Interpreting Status Display Codes; GIO Electric Product Warranty

Status Display Codes
The following is a list of the codes used in the status section of your
display. The error display and accompanying code corresponds to specific
e-bike statuses. These can be used by the rider or technician to diagnose
e-bike issues.
Code #
Status
Code #
Status
0
Normal
10
Communication reception failure
1
Reservation
11
Communication reception failure
2
Brakes
12
BMS communication failure
3
Power sensor fault
13
Headlight failure
4
6km/hr cruise control
30
Current anomaly
5
Real-time cruising
33
Turn the anomaly
6
Battery undervoltage
34
Motor phase deficiency
7
Motor failure
35
Motor Hall anomaly
8
Turning malfunction
36
Brake anomaly
9
Controller failure
37
Communication anomaly
Warranty
The limited warranty as contained herein is exclusive and in lieu of all
other warranties expressed or implied. There are no warranties that extend
beyond the description in this limited warranty.
GIO Electric guarantees this product, including charger, motor, controller,
to be free of manufacturing defects for a period of 12 months, and the
battery specifically for 24months. All warranty periods commence from the
date of shipment.
This limited warranty does not cover normal wear and tear items/parts.
(tires, brake pads, cables, etc) It does not cover the product issues due to
misuse, neglect, or accident. Nor any damage, failure, or loss caused by
improper assembly, set up, storage, maintenance, or improper servicing.
18