EasyManua.ls Logo

gio Supra - Page 14

gio Supra
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power ON but scooter doesn’t
move
Wires to motor loose
Check and reconnect wires
Defective controller
Replace controller
Defective motor
Replace motor
Charger not working
(no lights working)
No voltage in power outlet
Check wall outlet, use an
alternate outlet
Charger damaged/defective
Replace charger
Battery not charging
(always green light)
Charger damaged/defective
Replace charger
Battery not connected properly
Check and connect both
battery packs, fuse, etc.
Batteries too weak to be
detected by charger
Replace batteries
Reduced running distance
Battery not fully charged
Charge battery
Brakes making contact when
not applied
Adjust brakes
Tire pressure low
Inflate to correct pressure
Battery at end of lifetime
Replace battery
Scooter doesn’t stop when
applying brakes
Hydraulic line issue
Seek technical support/repair
Brake pads worn
Seek technical support/repair
In the event that you are having difficulty with your scooter outside of these issues or
these solutions are not correcting your issue please contact a technician at your
dealership or GIO customer service.
Wiring Schematic
13

Related product manuals