Scooter Operation
Powering your Scooter On/Off
Your Supra features a keyed ignition and remote fob. Insert the key into the ignition
located on the steering column and turn it clockwise to "ON". The LCD display will
activate, indicating that the scooter is on. Always turn the key to the OFF position to
power down the scooter when not in use to prevent excess battery drain, theft or
unauthorized use leading to accidents. Do not remove the key while the scooter is in
motion, this will result in loss of power and possible loss of control.
Your ignition switch also operated the latch to the battery compartment located under
the seat. To access it, turn the key counterclockwise past the off position to release the
seat latch. Ensure that the seat is securely latched back into position before riding.
The scooter can also be turned on/off and has its anti-theft system controlled remotely
with the included fobs. Each button functions as follows:
🔒
Arm Press once to arm the anti-theft system. Alarm will chirp indicating it
is armed, motor is disabled, alarm triggered if the scooter is moved.
Press again, while the alarm is armed, to trigger a continuous siren.
🔓
Disarm Press once to disarm the anti-theft system. Alarm will chirp twice
indicating it is disarmed. Pressing once also powers the scooter off.
⚡
Start Double press to turn the scooter on. Horn will sound once.
🔔
/
🔈
X Siren Press to remotely sound the horn. Press while the anti-theft siren is
active to mute the siren.
Accelerating
⚠
Please note, your scooter comes equipped with a pair of additional
safety features to prevent accidental acceleration. Refer to the
information below to achieve proper function.
Acceleration for your scooter is controlled by the twist grip throttle on the right
handlebar. Rotate throttle towards you to accelerate and release to slow down.
05
To Next Page
Loading...
