Horn
Press the red button label with “ ” to activate the scooter's horn.
Steering Lock
Your Supra features a steering lock to make it more difficult for thieves to steal/operate.
Turn the handlebars all the way to the left. Then with the key inserted in the ignition,
push the key inwards and turn clockwise to the locked
🔒
position. If the steering lock
doesn’t engage, wiggle the handlebars slightly left and right until it does. Remove the
key.
Kickstands
The Supra includes a pair of kickstands, a main center kickstand which raises the rear
wheel slightly off the ground and a small side kickstand. To use the side kickstand, push
the kickstand down, with your foot into the extended position and rest the scooter on the
kickstand. When not needed, straighten the scooter and push the kickstand back into
position. Avoid using the side kickstand on sloped or soft surfaces.
To use the main center kickstand, grip the handlebars for stability and firmly press down
on the bracket attached to the kickstand. Guide the scooter up onto the kickstand while
pushing it down, into the completely extended position. To release the kickstand gently
push the scooter forward to guide it off the kickstand until it's spring returns it to the
stored position.
Always ensure that kickstands are in the fully stowed position before accelerating.
Charging
⚠
Please carefully read and understand all battery and charger care
details and safety information (pg11) prior to your first charge cycle.
To avoid electrocution do not touch powered electrical contacts with
hands or other objects.
Your Supra ships with minimal battery charge and must be charged prior to first use.
To charge your scooter, first ensure the main breaker (under seat) is in the ON position,
your scooter will not charge with the breaker turned off. With the ignition key switched to
off, plug the output plug from the charger into the charging socket on the scooter below
the seat. Once connected to the scooter, plug the charger into a standard wall socket.
The light on the charger should turn red which indicates that it is charging and then turn
green when the battery is fully charged. Remove the charger from the wall outlet first
and then from the scooter/battery as soon as charging is complete.
07
To Next Page
Loading...
