Gira System 3000 User Manual

System 3000
Blind timer and timer Display
4 Commissioning
Set date and time
During the initial commissioning, a reset or a voltage failure of more than 4 hours, the year
flashes in the display and the following data must be set.
The times are changed in steps of 5 by pressing Ɵ or ƞ for a longer time.
￭ Change the year with Ɵ or ƞ and confirm with ƨ.
After that, month, day, hour and minute flash successively.
￭ Change the data with Ɵ or ƞ and confirm with ƨ.
+ 49 flashes in the display, the country code of Germany.
￭ Confirm with ƨ or select another country code with Ɵ or ƞ and confirm with ƨ.
The Astro times of 18 countries can be loaded via the country code.
YES flashes in the display for the automatic summer/winter time changeover (Ơ).
￭ Confirm with ƨ.
Changing to No deactivates the automatic summer/winter time changeover.
The setting is completed. The device is in automatic mode.
Country code
Astro calendars for 18 countries are stored in the cover. Each adjustable country has an under-
lying reference location that the Astro times refer to. If your own location is far away from the
reference location, it may be useful to enter an Astro shift or neighbouring country.
Country
code
Country (reference location) Country
code
Country (reference location)
+49 Germany (Kassel) +48 Poland (Lodz)
+31 Netherlands (Utrecht) +7 Russia (Moscow)
+43 Austria (Liezen) +380 Ukraine (Kiev)
+32 Belgium (Brussels) +420 Czech Republic (Brno)
+34 Spain (Madrid) +39 Italy (Rome)
+47 Norway (Oslo) +33 France (Bourges)
+46 Sweden (Stockholm) +352 Luxemburg (Luxemburg)
+358 Finland (Helsinki) +86 China (Shanghai)
+44 United Kingdom (Manchester) +65 Singapore
5 Operation of Venetian blind and shutters
Moving the blind/shutter
￭ Press ƞ or Ɵ for longer than one second.
The blind/shutter moves in the desired direction to the end position or stops when the but-
ton is pressed again.
An arrow flashes in the display in the direction of travel.
If a ventilation position has been saved, the blind stops in the ventilation position when moving
down from the top end position (see Saving the ventilation position). Press Ɵ again to move
the blind/shutter to the lower end position.
Adjusting the slats
￭ Press ƞ or Ɵ for less than one second.
3 / 10
32596512 10865949 10.07.2018

Gira System 3000 Specifications

General

Operating voltage	230 V AC
Protection type	IP20
Type of connection	Screw terminals
Housing Material	Plastic
Type	Control Unit
Compatibility	Gira System 3000
Ambient temperature	+45 °C
Power Supply	Mains power