EasyManuals Logo

Gira System 3000 User Manual

Gira System 3000
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
System 3000
Blind timer and timer Display
The quick programming overwrites the existing up or down times for Venetian blind inserts. For
switching and dimming inserts, the on and off times of the memory area ƙ are overwritten.
Memory area Ʀ is deactivated.
Press the required direction arrow ƞ for the up time/switch-on time or Ɵ for the down
time/switch-off time simultaneously with ƨ for longer than 1 second.
SAVE
flashes in the display. The current time is saved as a new switching time.
Displaying current time permanently
The display switches off after 2 minutes without any operation. Alternatively, the indication of
the current time can also be activated.
Press ƨ and Ƨ buttons simultaneously for longer than 10 seconds until the current time
appears.
The device has switched over to permanent indication of the current time
The time indication is deactivated again with the same operating step.
The current time is displayed briefly by pressing ƨ or Ƨ for longer than 1 second.
Resetting the cover to the default setting
Press Ƨ and Ƙ simultaneously for 10 seconds.
A countdown runs in the display. The reset is performed with "0".
The default setting is restored. The year flashes in the display and the date and time must
be re-entered.
8 Information for electrically skilled persons
DANGER!
Mortal danger of electric shock
Disconnect the device. Cover up live parts.
Fitting the device
Switching, dimming or Venetian blind insert or 3-wire extension are mounted and connected
properly (see instructions of the relevant inserts).
Fit the cover with frame on the insert.
Switch on mains voltage.
The year flashes in the display. Date and time must be set (commissioning).
If
Err
appears in the display, the cover was previously connected to an insert of another unit. To
enable operation again, either place the cover onto the correct insert or press Ɵ and ƞ for
longer than 4 seconds.
If the unit is changed, all switching times are set to the default setting.
This device includes an integrated battery. At the end of its useful life, dispose of the
device together with the battery in accordance with the environmental regulations. Do
not throw device into household waste. Consult your local authorities about
environmentally friendly disposal. According to statutory provisions, the end consumer is
obligated to return the device.
9 Technical data
Ambient temperature -5 ... +45 °C
Storage/transport temperature -20 ... +70 °C
Accuracy per month ± 10 s
Power reserve approx. 4 h
9 / 10
32596512 10865949 10.07.2018

Other manuals for Gira System 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gira System 3000 and is the answer not in the manual?

Gira System 3000 Specifications

General IconGeneral
Operating voltage230 V AC
Protection typeIP20
Type of connectionScrew terminals
Housing MaterialPlastic
TypeControl Unit
CompatibilityGira System 3000
Ambient temperature+45 °C
Power SupplyMains power